Center Hole Ribbed Boat Fender 10" x 28" 4pcs Inflatable Mooring Guard - Black

10" x 28" CENTER HOLE RIBBED INFLATABLE BOAT FENDERS - SET OF FOUR (4)

FEATURES INCLUDE:

• Vertical ribs for extra protection
• Reinforced tube ends to prevent lines from being pulled through if the fender gets caught in a tight spot
• Fenders are shipped deflated to save shipping costs
• Can be hung Vertical or Horizontal
• Super-soft fenders are non-abrasive
• Quantity: Set of 4 Inflatable Boat Fenders
• Style: Center Hole Ribbed
• Size: 10" x 28"
• Color: Black

DIMENSIONS: 10" x 28"

FENDER SIZING GUIDE
Recommended size for fenders by Boat Length:

Boats up to 10 ft: 4.5" x 16" Twin/Single Eye
Boats from 10-30 ft: 6.5" x 23" Twin Eye
Boats from 15-40 ft: 8.5" x 27" Twin Eye

Boats from 20-30 ft: 6.0" x 15" Center Hole
Boats from 30-40 ft: 8.0" x 20" Center Hole
Boats from 40-50 ft: 10" x 28" Center Hole


Consider using a larger size fender if mooring in high winds, rough water, or unprotected moorings. Many factors should be considered when determining what size fender to use. If in doubt, seek professional advice.

FENDER INFLATION GUIDE
Fill fender until sidewalls are firm, but not bulging. Fender should still compress 1/2" under light pressure. When inflating with an air compressor, set the PSI to 2 lbs. Moisten inflation needle prior to inserting into the fender. Pressure at 20 degrees C.


Important! Do not over-inflate as this will weaken the product and reduce its lifetime